347
edits
Changes
Jump to navigation
Jump to search
Line 642:
Line 642: + − # By default, the camera network is set to DHCP and the IP address, subnet mask, and default gateway parameters are automatically assigned. For static IP implementations, disable the DHCP setting by selecting Static IP address type. Manually enter your preconfigured IP address (mapped to the camera’s MAC address), Subnet mask, and Gateway parameters.+ − # The DNS type is set to ‘Dynamic DNS’ by default. You can change the DNS type to ‘DNS’ when using static IP addressing and use primary DNS address of 8.8.8.8 and an alternate DNS address of 8.8.4.4, if desired.+ − # The HTTP port is set to 80 by default.+ − # The default port for RTSP is 554.+ − # The default port for RTMP is 1935.+ − # If your router is configured to use UPnP settings, check the Enable UPnP box. Click the ‘Test UPnP’ button to test that your router has appropriately mapped the port forwarding parameters.+ − # Click ‘Apply’ to save the settings.+ + + + + Line 669:
Line 674: − # SMTP server name: mail.mym7.com+ − # Server port: 587+ − # Encrypt type: SMMARTTLS+ − # Authentication: On+ − # Username: noreply@mym7.com+ − # Password: grayed out+ − # Sender: noreply@mym7.com+ − # Enter up to three email addresses in the ‘Send to’ field(s)+ − # Enter a Subject line (e.g. M7 Camera Alert) and a Message (optional unless adding more than one email address).+ − # Click ‘Apply’ to save the settings. + − + + + + + + + + +
→Networking Settings
===== Networking Settings =====
===== Networking Settings =====
1. By default, the camera network is set to DHCP and the IP address, subnet mask, and default gateway parameters are automatically assigned. For static IP implementations, disable the DHCP setting by selecting Static IP address type. Manually enter your preconfigured IP address (mapped to the camera’s MAC address), Subnet mask, and Gateway parameters.
2. The DNS type is set to ‘Dynamic DNS’ by default. You can change the DNS type to ‘DNS’ when using static IP addressing and use primary DNS address of 8.8.8.8 and an alternate DNS address of 8.8.4.4, if desired.
3. The HTTP port is set to 80 by default.
4. The default port for RTSP is 554.
5. The default port for RTMP is 1935.
6. If your router is configured to use UPnP settings, check the Enable UPnP box. Click the ‘Test UPnP’ button to test that your router has appropriately mapped the port forwarding parameters.
7. Click ‘Apply’ to save the settings.
===== Wireless Settings =====
===== Wireless Settings =====
M7CMS uses the following default email server and account settings:
M7CMS uses the following default email server and account settings:
1. SMTP server name:
2. Server port:
3. Encrypt type:
4. Authentication:
5. Username:
<blockquote>[[File:Note.png]] '''''Note:''''' Email alerts are only available with firmware version v1.4.0 or later.</blockquote>
6. Password:
7. Sender:
8. Enter up to three email addresses in the ‘Send to’ field(s)
9. Enter a Subject line (e.g. M7 Camera Alert) and a Message (optional unless adding more than one email address).
10. Click ‘Apply’ to save the settings.<blockquote>[[File:Note.png]] '''''Note:''''' Email alerts are only available with firmware version v1.4.0 or later.</blockquote>
===== FTP Settings =====
===== FTP Settings =====