User Manual

From IM Security - Microseven Wiki
Revision as of 06:52, 27 December 2020 by Microseven (talk | contribs)
Jump to navigation Jump to search

System Installation

Basic System Requirements

To ensure proper system performance, Microseven requires Microsoft Windows 7 or above and an Intel Core i3 or a faster multi-core processor.

Software and Firmware Upgrade

Obtaining the Latest Software and Firmware

Microseven enhances features and functionality through regular firmware and software updates. To take advantage of the newest enhancements, it is important to upgrade your camera(s) with the latest firmware and software available. This section presents the steps for downloading setup files onto your local system. The setup files contain installers that will upgrade your system with the latest camera software.

1. Go to Microseven’s download site located at https://www.microseven.com/myaccount/download.html

2. Locate the “Software Downloads” section.

3. Click the ‘Download Now’ button. This will automatically download a file with the .exe extension (Windows) or .dmg extension (Mac) into your local Download folder.

 
Software download section.

Note: Clicking the hyperlink text will open a “What’s New” web page containing change log information for all revisions.

4. Locate the “Firmware Downloads” section on Microseven’s download site.

5. Determine the device type associated with your camera model as shown in the following table.

6. Click the ‘Download Now’ button next to the camera’s appropriate device type. This will automatically download a setup file with a .pkg extension into your local Download folder.

Important: Installing an incompatible version of firmware may render your camera inoperable. If you have any questions regarding the firmware version or your camera’s device type, please contact Microseven support at support[at]microseven.com prior to installing the firmware.

Installing or Upgrading Microseven Software

This section describes how to install or upgrade Microseven camera software including the Cam Locator and Microseven Camera Management System (M7CMS) onto your local system. The Cam Locator is used to establish initial camera settings and M7CMS is used to configure advanced camera options and features.

Microseven software is installed or upgraded in two basic steps. The first step involves running a setup file (*.exe or *.dmg) that unpacks a software installation program (Setup Wizard) onto your local system (see Section 1.2.1 for instructions on downloading the setup file onto your local system). The second step includes running an installation wizard that installs the Cam Locator and M7CMS onto your local system.

Upgrading the Camera Firmware

This section describes how to upgrade the Microseven camera firmware using the setup file downloaded onto your local system (see Section 1.2.1).

1. Power on the camera using the provided power supply and connect an Ethernet cable between the camera and your router. Wait at least 60 seconds before beginning the set up to allow full enablement of the hardware and network recognition.

2. Click the Cam Locator desktop icon to open the Microseven Cam Locator window.

3. Select the camera you wish to configure and click the ‘Network Setup’ button to open the Camera Setup window.

4. On the Camera Setup window, click ‘Browse’ to open a browse menu and select the appropriate “*.pkg” file.

5. Click ‘Open’ to transfer the “*.pkg” file name to the “Firmware” field of the Camera Setup dialog window.

6. Click the ‘Upgrade’ button on the Camera Setup dialog.

7. After the firmware is successfully upgraded, a confirmation window appears.

8. Click ‘OK’ to close the window.

Initial Camera Setup

Using the Cam Locator

The Microseven Cam Locator searches the local network for cameras and devices supporting multicast traffic.

1. Make sure the camera(s) are powered up and connected to the local network with a standard Cat5e Ethernet cable between the camera and your router. Allow one minute (60 seconds) before beginning the setup process in order to fully enable the camera's hardware and allow it to be recognized by your network.

2. Click the Cam Locator desktop icon to open the Microseven Cam Locator. Highlight the desired camera from the list and click the ‘Network Setup’ button to bring up the Camera Setup window.

Note: If a network camera does not appear in the Cam Locator, confirm the camera's power adapter and Ethernet cable are properly connected. Click the ‘Search’ button again to find your camera.

The following table contains instructions on establishing initial camera settings including Login Info, Network Settings, HTTP Port, Firmware Upgrade, Test Video, and Setup WiFi settings found on the “Camera Setup” menu.

Camera Management and Operations

Using the Microseven Camera Management Software (M7CMS)

The M7CMS Interface

Monitoring control

View Bar (View Mode, View Option and View Playback Controls)

System Configuration

Add/Remove Camera, Camera Groups

User Account

Manual and Scheduled Recording of Live Video

Establishing Advanced Camera Properties

Camera Tab

Video Tab

Detection Tab

Capture & snapshot Tab

Recording Tab

User Accounts Tab

System Tab

Local Video Playback