Changes

Jump to navigation Jump to search
1,071 bytes added ,  06:01, 26 December 2020
Line 51: Line 51:     
===Using the Cam Locator===
 
===Using the Cam Locator===
 +
The Microseven Cam Locator searches the local network for cameras and devices supporting multicast traffic.
 +
 +
1. Make sure the camera(s) are powered up and connected to the local network with a standard Cat5e Ethernet cable between the camera and your router. Allow one minute (60 seconds) before beginning the setup process in order to fully enable the camera's hardware and allow it to be recognized by your network.
 +
 +
2. Click the Cam Locator desktop icon to open the Microseven Cam Locator. Highlight the desired camera from the list and click the ‘Network Setup’ button to bring up the Camera Setup window.<blockquote> '''''Note:''''' If a network camera does not appear in the Cam Locator, confirm the camera's power adapter and Ethernet cable are properly connected. Click the ‘Search’ button again to find your camera. </blockquote>The following table contains instructions on establishing initial camera settings including Login Info, Network Settings, HTTP Port, Firmware Upgrade, Test Video, and Setup WiFi settings found on the “Camera Setup” menu.
    
==Camera Management and Operations==
 
==Camera Management and Operations==

Navigation menu