Changes

Jump to navigation Jump to search

User Manual (view source)

Revision as of 10:06, 17 February 2021

5,552 bytes added ,  10:06, 17 February 2021
→‎FTP Settings
Line 378: Line 378:  
===== Email Settings =====
 
===== Email Settings =====
 
[[File:Camera emailsettings.jpg|alt=Email Settings|720x720px]]
 
[[File:Camera emailsettings.jpg|alt=Email Settings|720x720px]]
−
  −
M7CMS supports three event detection types including motion detection, video lost detection and I/O alerts. When the event is detected, M7CMS will send an alert message and a captured snapshot to your email box.
  −
  −
M7CMS uses the following default email server and account settings:
      
1. SMTP server name:
 
1. SMTP server name:
Line 405: Line 401:  
===== FTP Settings =====
 
===== FTP Settings =====
 
[[File:Camera ftpsettings.jpg|alt=FTP Settings|720x720px]]
 
[[File:Camera ftpsettings.jpg|alt=FTP Settings|720x720px]]
 +
 +
1. Enter the FTP server name, FTP server port, username, password, and the FTP server path for your FTP account.
 +
 +
2. Test the FTP settings by clicking the ‘Test’ button. If the test passes, click ‘Apply’ to save settings.
    
===== Audio Settings =====
 
===== Audio Settings =====
 
[[File:Camera audiosettings.jpg|alt=Audio Settings|720x720px]]
 
[[File:Camera audiosettings.jpg|alt=Audio Settings|720x720px]]
 +
 +
1. The Encoded mode is set to G711 by default.
 +
 +
2. Audio is enabled by default for Primary, Secondary, and Tertiary streams.
 +
 +
3. Audio input type is set to ‘Line in’ by default. Keep the default setting for best audio performance.
 +
 +
4. Audio input volume (1-100) is set to 10 by default.
 +
 +
5. Audio output volume (1-100) is set to 95 by default.
 +
 +
6. Click ‘Apply’ to save the settings.
    
===== DDNS Settings =====
 
===== DDNS Settings =====
Line 420: Line 432:  
===== Video Setup =====
 
===== Video Setup =====
 
[[File:V videosetup.jpg|alt=Video Setup|720x720px]]
 
[[File:V videosetup.jpg|alt=Video Setup|720x720px]]
 +
 +
1. The video format is set to ‘NTSC’ by default.
 +
 +
2. Video coding is set to ‘mainprofile’ by default.
 +
 +
3. To optimize system performance, Microseven suggests the following default primary, secondary, and tertiary settings for the bit rate, I-frame interval, and maximum frame rate: - Primary: 2048, 25, 50 - Secondary: 200, 10, 20 - Tertiary: 128, 07, 15
 +
 +
4. The bit rate type is set by default to VBR (variable bit rate).
 +
 +
5. Click the ‘Smartphone and Pad’ button to establish a large or small window when viewing video on mobile smartphone and tablet devices.
 +
 +
6. Click ‘Apply’ to save the settings.
    
===== Display Setup =====
 
===== Display Setup =====
 
[[File:V displaysetup.jpg|alt=Display Setup|720x720px]]
 
[[File:V displaysetup.jpg|alt=Display Setup|720x720px]]
 +
 +
 +
1. Display Setup provides Brightness, Contrast, Saturation, Hue, and Exposure value (EV) adjustments.
 +
 +
2. Click ‘Set Default” to restore all values to system default settings.
 +
 +
3. Click ‘Apply’ button to save the changes.<blockquote>'''''Tip:'''''  IR night vision can be brightened or darkened by increasing or decreasing the exposure value.</blockquote>
    
===== Infrared IR-Cut Setup =====
 
===== Infrared IR-Cut Setup =====
 
[[File:V infraredir-cutsetup.jpg|alt=Infrared IR-Cut Setup|720x720px]]
 
[[File:V infraredir-cutsetup.jpg|alt=Infrared IR-Cut Setup|720x720px]]
 +
 +
Click the radio button to either ‘Turn on’ or ‘Turn off’ the current camera’s IR lights in night vision. For cameras situated behind a glass pane, you can eliminate IR glare by turning the IR lights off. When the IR light setting is turned off, the option to select an IR-Cut option of either ‘Black and white mode’ or ‘Color mode’ becomes available.
    
==== MOTION RECORD ====
 
==== MOTION RECORD ====
Line 432: Line 465:  
===== Motion Detection Record =====
 
===== Motion Detection Record =====
 
[[File:M motiondetectionrecord.jpg|alt=Motion Detection Record|720x720px]]
 
[[File:M motiondetectionrecord.jpg|alt=Motion Detection Record|720x720px]]
 +
 +
M7CMS provides flexible event detection capabilities that can be calibrated to suit most environments.  
 +
 +
1. Set the motion sensitivity level, where 100 is the most sensitive to movement and 1 is the least sensitive. The sensitivity level is set to 50 by default.
 +
 +
2. Select the number of snapshots that will be taken when motion is detected (between 1 and 3). Snapshot is set to 1 by default.
 +
 +
3. Check any of the actions you wish to enable when M7CMS detects motion. Choose from ‘Send email’, ‘Snapshot to SD Card’, Upload snapshot to FTP’, ‘Record to SD Card’, and/or ‘Upload record to FTP’.
 +
 +
4. Schedule motion detection for specific day(s) of the week and for 1 to 4 time duration blocks.
 +
 +
5. Check the ‘Apply to everyday’ box if you wish to copy the current setting to all days of the week.
 +
 +
6. Click the ‘Set motion detection area’ button to display a Motion Detection Area Setting window.
 +
 +
7. Left click and drag the cursor across the desired motion detection area. The selected area(s) will be highlighted in red. Up to four different motion detection areas can be set.
 +
 +
8. Click ‘Apply’ to save the current settings.
    
==== CAPTURE & SNAPSHOT ====
 
==== CAPTURE & SNAPSHOT ====
Line 438: Line 489:  
===== Auto Capture =====
 
===== Auto Capture =====
 
[[File:C autocapture.jpg|alt=Auto Capture|720x720px]]
 
[[File:C autocapture.jpg|alt=Auto Capture|720x720px]]
 +
 +
Auto Capture automatically captures snapshots according to a user-defined schedule and can send the snapshots to an FTP server, email account, or the camera’s MicroSD card.
 +
 +
1. Use the File mode drop down menu to choose a naming convention for auto captured files. The Date/Time Suffix option creates a filename using the first two digits of the year, month, day, hour, minute, and second (e.g. P16052721145400.jpg). The Overwrite option activates the File name field where you can type a file name. The Date/Time Suffix file mode is selected by default.
 +
 +
2. Check the box beside the delivery method(s) you want to enable. You can choose from Enable auto capture to FTP, Enable auto capture to Email, Enable auto capture to SD Card.
 +
 +
3. Set the capture interval for each enabled option. The default interval is set to 60 seconds.  
 +
 +
4. Set the Auto capture schedule including the day and duration for each day.
 +
 +
5. Check the ‘Apply to everyday’ box if you wish to copy the current setting to all days of the week.
 +
 +
6. Click Apply button to save and apply the current settings.
    
==== CONTINUOUS RECORD ====
 
==== CONTINUOUS RECORD ====
Line 444: Line 509:  
===== Schedule Continuous Record =====
 
===== Schedule Continuous Record =====
 
[[File:Co schedulerecord.jpg|720x720px]]
 
[[File:Co schedulerecord.jpg|720x720px]]
 +
 +
 +
Recording schedules can be set for specific days of the week, intervals, or durations. This setup page is for the continuous recording settings ONLY.
 +
 +
1. Check the ‘Schedule Rec Enable’ box.
 +
 +
2. Use the dropdown menu to select a day of the week to schedule a recording.
 +
 +
3. Set from 1 to 4 time duration blocks for the day’s recording.
 +
 +
4. Check ‘Apply to everyday’ if you wish to copy the current setting to all days of the week.
 +
 +
5. Click ‘Apply’ to save the settings.<blockquote>'''''Tip:''''' The Motion detection schedule settings are found under the Motion Record tab.</blockquote>
    
===== Continuous Record Options =====
 
===== Continuous Record Options =====
 
[[File:Co recordoptions.jpg|alt=Continuous Record Options|720x720px]]
 
[[File:Co recordoptions.jpg|alt=Continuous Record Options|720x720px]]
 +
 +
The Record Options tab is used to control motion and 24x7 recording.
 +
 +
1. Enter a recording file length between 15-900 seconds.
 +
 +
2. Choose the recording stream (primary=default, secondary, or tertiary).
 +
 +
3. Click ‘Apply’ to save the settings. Changes to the recording stream type will cause the camera to reboot automatically after clicking ‘Apply’.
    
==== USER ====
 
==== USER ====
Line 453: Line 539:  
===== User Accounts =====
 
===== User Accounts =====
 
[[File:U useraccounts.jpg|alt=User Accounts|720x720px]]
 
[[File:U useraccounts.jpg|alt=User Accounts|720x720px]]
 +
 +
1. Enter the User username and password.
 +
 +
2. Re-type the password to confirm the entry.
 +
 +
3. Click ‘Apply’ to save the settings and close the dialog.
    
==== SYSTEM ====
 
==== SYSTEM ====
Line 459: Line 551:  
===== Firmware Upgrade =====
 
===== Firmware Upgrade =====
 
[[File:S firmwareupgrade.jpg|720x720px]]
 
[[File:S firmwareupgrade.jpg|720x720px]]
 +
 +
The Firmware Upgrade window displays camera Device type, Cam ID, PIN code, and Firmware version. Refer to Section 1.2 for detailed instructions on performing a firmware upgrade.
    
===== Storage =====
 
===== Storage =====
 
[[File:S storage.jpg|alt=storage|720x720px]]
 
[[File:S storage.jpg|alt=storage|720x720px]]
 +
 +
Storage displays SD card information including Status, Total Size, and Free Size. Power off the camera before installing the MicroSD card. The maximum capacity is up to 128 GB MicroSD card as SDHX.
    
===== Set Auto Reboot =====
 
===== Set Auto Reboot =====
Line 468: Line 564:  
===== System Log =====
 
===== System Log =====
 
[[File:S systemlog.jpg|alt=System Log|720x720px]]
 
[[File:S systemlog.jpg|alt=System Log|720x720px]]
 +
 +
User actions and warning messages are displayed on the System Log tab. Click ‘Reset’ to clear the log records.
    
==== SIGN OUT ====
 
==== SIGN OUT ====
Retrieved from "https://wiki.microseven.org/Special:MobileDiff/294"

Navigation menu