Changes

[[File:Cmsinstall8.jpg|none|thumb|400x400px]]9. Click ‘Install’ to continue with the installation. Once the installation has completed, click ‘Finish’ to exit Setup and launch the Microseven Cam Locator.

[[File:Cmsinstall8.jpg|none|thumb|400x400px]]9. Click ‘Install’ to continue with the installation. Once the installation has completed, click ‘Finish’ to exit Setup and launch the Microseven Cam Locator.

==== Upgrading the Camera Firmware ====

==== Upgrading the Camera Firmware Using Cam Locator or Web dashboard ====

===== Upgrading the Camera Firmware Using Cam Locator  =====

This section describes how to upgrade the Microseven camera firmware using the setup file downloaded onto your local system (see Section 1.2.1).

This section describes how to upgrade the Microseven camera firmware using the setup file downloaded onto your local system (see Section 1.2.1).

8. Click ‘OK’ to close the window.

8. Click ‘OK’ to close the window.

==== An Alternative Way Upgrading the Camera Firmware - Using Internet Browser to access the web-based setup page of the camera ====

===== Upgrading the Camera Firmware Using Web Dashboard =====

1 Click the Cam Locator desktop icon

1 Click the Cam Locator desktop icon

[[File:Camlocatoricon.jpg|alt=Cam Locator|none|thumb|Cam Locator]]

[[File:Camlocatoricon.jpg|alt=Cam Locator|none|thumb|Cam Locator]]

2. Select the camera you wish to configure and double click on the camera. Or you select the camera, and click 'Open'.

2. Select the camera you wish to configure and double click on the camera. Or you select the camera, and click 'Open'.

[[File:Camlocatorwindow.jpg|alt=access the web-based setup page of the camera|none|thumb|500x500px|access the web-based setup page of the camera]]

[[File:Camlocatorwindow.jpg|alt=access the web-based setup page of the camera|none|thumb|500x500px|Using web dashboard to upgrade the firmware.]]

3. Open access to the web-based setup page of the camera. The default login name and password to the page is:  

3. Open the web dashboard. The default login name and password to the page is:  

Username: '''admin'''

Username: '''admin'''

Password: '''password'''

Password: '''password'''

All Microseven cameras have a built-in web-based setup page that allows you to customize settings and set up advanced properties.  

All Microseven cameras have a built-in web dashboard that allows you to customize settings and set up advanced properties.  

[[File:Web-based-login.jpg|alt=Login|none|thumb|400x400px|Login]]4. You landed on the web-based setup page, and you click on 'Camera Setup'.[[File:Homepage.jpg|alt=Home page|none|thumb|500x500px|Home page]]5. The Camera Setup page with all the camera properties shows below.[[File:Properties.jpg|alt=Properties|none|thumb|500x500px|Properties]]6. Click 'SYSTEM', then go 'Choose File' to open a browse menu and select the appropriate "*.pkg" file.  

[[File:Web-based-login.jpg|alt=Login|none|thumb|400x400px|Login]]4. You landed on the web dashboard page, and you click on 'Camera Setup'.[[File:Homepage.jpg|alt=Home page|none|thumb|500x500px|Home page]]5. The camera web dashboard with all the camera properties and configuration shows below.[[File:Properties.jpg|alt=Properties|none|thumb|500x500px|Properties]]6. Click 'SYSTEM', then go 'Choose File' to open a browse window and select the appropriate "*.pkg" file.  

[[File:Firmwareupgrade.jpg|alt=SYSTEM -> Choose File|none|thumb|500x500px|SYSTEM -> Choose File]]7. Click 'Open' to transfer the "*.pkg" file name to the 'Firmware Upgrade' page under the 'SYSTEM' menu.   

[[File:Firmwareupgrade.jpg|alt=SYSTEM -> Choose File|none|thumb|500x500px|SYSTEM -> Choose File]]7. Click 'Open' to transfer the "*.pkg" file name to the 'Firmware Upgrade' page under the 'SYSTEM' menu.   

[[File:Open.jpg|alt=Pick up a updated firmware.|none|thumb|500x500px|Pick up a updated firmware.]]

[[File:Open.jpg|alt=Pick up a updated firmware.|none|thumb|500x500px|Pick up a updated firmware.]]